Combos - Front Winch Bumper for Polaris RZR Pro XP (2020+) and 4500 lbs Winch

Description

* Constructed of Front Bumper and Winch Mount Plate Made with 1-3/4 Inch Steel Tube and 3/16 Inch Steel Sheet
* Winch Ready.  Designed to Accommodate Most Winches Rated to 4500 lbs with Winch Mounting Bolt Pattern 4 Hole Wide 6.60" x 3" and Fairlead Bolt Patterns 6.00".
"Do not work with winches and fairlead with 4.875" bolt pattern"
"Do not work with 4-Way Roller Fairlead"
* Provide Premium Protection and Aggressive Style Contoured to The Front of Your RZR Pro XP
* Integrated Light Mount for Additional Lighting (Light Bar not included)
* Easy Installation by Mounting to The Chassis Using The Included Hardware.  No Drilling Required
* Use High Quality Powder Coating to Protect Against UV Rays from Apparent Fading and Corrosion for Up to 1500 Hours, Which is Superior to the Majority of Competitors
* Designed by Aprove USA
Note: The whole bumper system, including the upper bumper and the winch mount need to be installed together on the vehicle.  Either portion cannot be used separately with the stock bumper or winch mount.
Fitment:
Polaris RZR Pro XP (2020+)
Polaris RZR Pro XP 4 (2020+)
Winch Specifications:
1) Rated Line Pull: 4500lb (2040kg) Single-line
2) Motor: 12V DC, 1.48HP Series Wound
3) Geartrain: 3-Stage Planetary
4) Gear Ratio: 166:1
5) Dyneema Synthetic Rope: 6mm*15.24M
6) Fairlead: Aluminum Hawse Fairlead
7) Winch Dimensions: 361.5mm x 117mm x 121mm
8) IP67 Waterproof for Winch Body
9) Low Noise Level < 80 dB
10) Easier Replacement: Able to Replace the Knob from Outside
Endure following tests:
- Dust Spray Test
- Water Spray Test
- High/Low Temperature Test for Winch Body and Accessories ( - 40
o
C ~ 80
o
C)
- 1500 Hours' UV Test
- 72 hours Salt Spray Test for Steel Cable and Hardware
** Bolt Pattern for Winch: 3" x 6.65"(76mm x 169mm - 4 Holes)
Specification are Subjected to Change without Prior Notice!